Ranger Tie Down Anchors
★★★★★ These things work!
“These things grip!!! I installed them, tightened them down and then hooked a pulley to one of them and hoisted a 230 pound deer into the bed of my Polaris Ranger. Now that is some seriously strong holding power…” — Timothy R.T.
★★★★★ Perfect!
“Installed easily on my 2022 Polaris Ranger Premium. Easy to remove if you wanted to. Looks good. Works great. Not much more to say.” — Keith S.
★★★★★ Very easy to install
“Installed in seconds and very sturdy. Helps keep things from blowing out!” — Steven Hansen
Ranger Knob Tie Downs
★★★★★ Easy to use. Great quality!!!!
“These are AWESOME!!! At first I thought I had ordered the wrong set for my Ranger because it just fell into the hole on the bed rail. So I held each one in my hands and turned the knob a few times to expand them just a little. Then I attached them to the gun rack base and they fit right in the factory holes. I tightened them down good and we are ready to roll!!! I ordered these because I want to be able to remove the gun rack if we need to. These are going to work GREAT!!!” — Amanda
★★★★★ GripPRO Anchors are the answer !!!
“These knob type anchors are the answer to anything custom you want to hold down in the back of your Polaris Ranger. The key to any of these anchors is to get them snug in your hand first where you can hold both ends and then when you get them in the hole they will tighten because of the friction against the hole wall. At that point, you can tighten them down so tight that they are not getting pulled out by anything. The construction is heavy duty and I can’t see them failing for anything short of some kind of Red Bull Polaris Ranger bungee jump stunt where you use one of the GripPRO anchors as the connection point for the bungee. Heck, use two of them and it might work for that but I don’t think they would recommend it. Also, these guys stand behind what they sell. And no I did not get them free for this review, I just believe in the product.” — James
★★★★★ How it should be from Polaris
“These GripPRO Anchors are how they should be from the factory. I used them on my Polaris General to secure my double gun scabbard. I was having issues with keeping the scabbard system secured with the factory Lock-and-Ride system, I bought these and it is super secure now. These are worth every penny and I highly recommend them. The owner of the company stands behind their products and will reach out to you to see if you are satisfied with them. Well done.” — Bryan
Ranger Flag Mounts
★★★★★ Heavy Duty lock-and-ride compatible for newer Polaris Ranger
“Less than 1/2 the price I paid at the Polaris dealer, this mount has a 1/4″ stainless steel strap (instead of aluminum) and a 9/16″ hole for the flag mount.” — Michael Kelley
★★★★★ This product is awesome
“This is an awesome product for my USA whip flag. VERY easy to put in and take out. 100% recommend.” — Sherry Walker
★★★★★ Polaris Ranger 900XP Flag Mount
“Easy install, perfect fit. Will be ordering another one soon for multiple flags. This is for the Ranger only, not a RZR. Was hard to find the right one due to Rangers having bigger holes around cargo bed. So happy to find these!” — Allison Wade
RZR Tie Down Anchors
★★★★★ Must buy
“These are absolutely awesome. They shipped very quick. And did exactly as advertised. Only suggestion would be if you have a Polaris razor go ahead and order eight you will want them.” — Alan
★★★★★ Just buy the good stuff from the get-go!
“I bought a set of the cheaper units thinking they were all the same and I could save a few bucks. Well, this is what they looked like after 2.5 months. They never seemed to get tight enough, kept coming loose, and would pull out easily. I bought a set of the GripPro and went for a 78mi ride with absolutely no issues what-so-ever. The GripPro anchors are a harder material, and longer. Also, the ribs are a thicker design. Learn from my mistake, go with the good ones from the start!” — Jason
★★★★★ Good for my Application
“Bought these to have tie downs on the back of my new 2021 Polaris RZR. Saw them on Youtube from a person using them for the same thing and he said they were perfect. Price was right so I figured I couldn’t get burned too bad if they didn’t work. They are dead solid. I’m not worried about losing anything out the back. Thanks to the guy on Youtube.” — Ken Malin
RZR Knob Tie Downs
★★★★★ Quality is top notch. Wouldn’t trust my gun to a cheap knockoff
“I love these anchors. Great quality, easy to use, and customer obsession is top notch. Small American business turning out high quality products. What is not to love. If you have a Polaris machine with lock and ride this is the company to go with. I know I won’t be buying my lock and ride anchors anywhere else from here on out. Purchased them to use with the Kolpin Stronghold mount to use with the Stronghold gun boot. Wouldn’t trust my gun to anything but the highest quality anchors. Not worth buying the cheap knockoffs hoping my gun will be safe and secure. GripPRO, you have a new fan.” — Paul Lowry
★★★★★ Perfect fit
“Used these to mount the Polaris Lock and Ride Storage box in my RZR570S. Everything lined up perfectly and the box is very securely mounted.The only thing I would suggest, is that if you are going to remove the box for any reason, don’t remove the knobs, just loosen them. I removed the knobs and the mounts fell through the bottom.” — Eric
★★★★★ Fit very well and appear to be made well.
“I just installed these on my 2019 RZR Turbo S and they fit very well. They are of better quality than the last set I bought from a different manufacturer. Much better impression on these.” — Shannon Rohrbaugh
RZR Flag Mounts
★★★★★ Easy install for the Polaris RZR machines
“The product exceeded my expectations from the description on Amazon The basic mount is a product I have used on my RZR already so I knew what that would be, but the stainless steel bar was way more heavy duty than I thought it would be. In my case, I mounted the Tusk 1/4″ flag mount system base and it fit perfectly. The overall mount is solid in the RZR mount holes and I have been able to move it around to try out different locations to optimize my flag mount. (This is not so easily done with other mounting systems.)” — Tracy Hansen
★★★★★ The right flag holder for the job.
“This flag mount worked great. I was surprised, and thinking it wouldn’t be strong enough to keep the Polaris flag upright on my Polaris RZR 800s. I was wrong. I simply attached the flag to the mount and with a few turns take the flag off or put it back on. Simple.” — Bobby Bear
★★★★★ Does as designed 100%.
“This flag holder is very very well made and works awesome on the 2011 Polaris RZR 800S I own. I now have purchased two of these and will say again it is very well made. I is solid and fits my RZR 2011 800s perfectly. I 100% recommend these for mounting of your whip and flags.” — Jamie Reed